Factory & quality control

ACME Building Material Xuzhou Co., Ltd. has produced and marketed plywood and wood products since 2005. Panels are exported to North America, Europe, the Middle East, Puerto Rico, Asia and South Africa at an average of 3,000–5,000 cubic metres per month.

2005Manufacturing and exporting since
2Own factories in Pizhou, Jiangsu
3,000–5,000 m³Average monthly export volume
7Overseas offices and warehouses
Plywood production line in the Sunnyplex factory

Two factories, one production standard

Both plants sit three kilometres apart in Pizhou, Jiangsu — the centre of Chinese plywood production. Pressing, glue mixing, calibration and packing all happen in-house.

  • Factory 1 — Xuzhou Rhino New Materials Co., Ltd., premium export grades
  • Factory 2 — Xuzhou HuaQing Wood Co., Ltd., volume formwork grades
  • Own hot presses, glue lines, sanding and calibration equipment
Quality control inspection of plywood thickness

Quality control on every order

Quality is life. A dedicated QC team follows each order from material and veneer selection through to sheet-by-sheet packing, so what leaves the yard is what you approved.

  • Incoming veneer and glue inspection before pressing
  • Thickness, density and glue-bond checks during production
  • Edge, film and moisture inspection at packing
  • Photos and loading reports sent before shipment

Watch the plant running

Four clips filmed at our Shanghai Road plant in Pizhou — loading the press, the pressing cycle, and panels leaving the yard for the container. Phone footage from the shop floor, not stock video.

Loading the hot pressGlue-spread panels loaded into a 20-opening press, Xuzhou Rhino New Materials.
Press line runningFour hot presses working side by side on film faced formwork.
Pressing cycle and surfaceThe press opens, the panel comes out — film surface and edge checked straight away.
Gate, yard and loadingTrucks at the gate and panels moving from the warehouse to the container.

Global network

Seven overseas offices and warehouses keep stock and spares close to our customers.

AsiaCambodia
AfricaKenya
North AmericaMexico
South AmericaPeru
EuropeNetherlands · Poland
OceaniaAustralia

From our yard to the ship

Lianyungang is our home port, 200 km from the factory. Every bundle is strapped, corner-protected and labelled in Pizhou, then craned straight into the hold — filmed on the quay by our own staff.

Ship's gear loading at LianyungangStraps on, bundle up, straight into the hold

Packed for a sea voyage, not just a truck

Film faced panels are heavy and the edges bruise easily. Our export packing is built around that: PET strapping on every bundle, corner boards on all four edges, and soft slings at the quay so no chain ever touches the panel.

  • PET band + corner boards + printed bundle label with size, grade and quantity
  • 20 ft / 40 ft HQ loading plans issued before the truck leaves the yard
  • Photos of every bundle and of the stow sent before the vessel sails
  • Fumigation, ISPM-15 and full export documents handled in-house
Ask for a loading report
Plywood bundles staged on the quay at Lianyungang port
Staged on the quayCounted and checked before the ship berths
Gantry crane lifting two plywood bundles towards a bulk carrier
Two bundles a liftQuay gantry working alongside the vessel
Plywood bundle lifted by soft slings over the ship's hull
Soft slings onlyNo chains against the panel edges
Ship's crane swinging a plywood bundle over the hold
Over the coamingShip's crane taking the bundle into the hold
Plywood bundles lifted at night under floodlights
Second shiftLoading continues under floodlights
Workers strapping an 18 mm film faced plywood bundle at night
Banded and labelled18 mm film faced, ready for the sling
Bulk carrier JIU HENG alongside berth 14 at Lianyungang port at night
Alongside at berth 14, Port of LianyungangWhere most of our FOB shipments sail from

Get factory-direct plywood prices

Send the product, thickness, size and quantity — our export team replies with an FOB quotation, usually within one working day.