
Plastic Faced Plywood — PP & PPE
Two plastic faces on the same idea: PPmax TECH with a 0.5 mm PP coating for everyday formwork, and PPE with a 1.6 mm PPL skin for formwork systems and large panels. Both are pressed 8 – 21 mm thick, up to 1,550 × 3,050 mm, on poplar, eucalyptus or birch cores with melamine or phenolic glue — and both replace film faced plywood in repetitive concrete work.
Two plastic faces · PP and PPE coated plywood
| PPmax TECH — PP | PPE — PPL | |
|---|---|---|
| Plastic face | 0.5 mm PP, both sides | 1.6 mm PPL, both sides |
| Core | Poplar / eucalyptus / birch — combi to order | |
| Glue | Melamine or phenolic (WBP) | |
| Formats | 1,220 × 2,440 / 1,250 × 2,500 / up to 1,550 × 3,050 mm | |
| Thickness | 8 – 21 mm | |
| Declarations | — | E1 · B2 fire class · EN 314-2 class 3 bond |
| Best for | General formwork, high re-use | Formwork systems, big panels |
Same idea, two skins: the PP panel is the everyday workhorse, the PPE panel is the system panel with a thicker PPL face and a certified E1 / B2 build.
More than just waterproof
The coating is PP — polypropylene. Polypropylene brings corrosion resistance, acid and alkali resistance and surface hardness, so the panel holds its face in wet pours, alkaline cement water and site chemicals.
A film faced panel stays waterproof only while its film lasts. On a PP faced panel the face itself is plastic, so there is nothing to wear through.
A perfect concrete wall, pour after pour
Wear resistance is what decides the finish. A normal film faced panel performs for one or two uses; from the second or third cycle the surface wears during stripping, the face roughens, and the damage shows up in the wall.
Because the PP face resists abrasion, the panel comes back with the same bright surface. The concrete keeps a clean, even colour, and the panel is ready for the next pour instead of the skip.




What the two faces give you
- 0.5 mm PP plastic on both sides
Wear-resisting and corrosion-resisting PP plastic is coated on both faces of the panel and connected to the inner plywood core, so either side can be turned to the concrete.
- Physical and mechanical values well above film faced plywood
Higher cohesion between face and core, higher abrasion resistance and no film to peel — the panel keeps its thickness, its edges and its face through cycle after cycle.
2 products in this range
Ask for a priceNeed a specific thickness, size, core or film colour in this range? Send us your specification or WhatsApp +86-13305214888 — we produce to order.
Get factory-direct plywood prices
Send the product, thickness, size and quantity — our export team replies with an FOB quotation, usually within one working day.