Factory direct100% Full Baltic Birch Plywood
100% full Baltic birch plywood: every veneer birch, face to back — 3 – 25 mm, 1,525 × 1,525 mm and 8 × 5 ft, grades B/B to CP/CP, phenolic WBP glue, E1.
- Thickness3 – 25 mm
- Sheet1,525 × 1,525 mm
- Core100% birch
- GradesB/B · BB/BB · CP/CP
- GluePhenolic WBP
- Density640 – 700 kg/m³
Made in our own factories in Pizhou, Jiangsu — no trading margin
Grade pair, thickness and sheet size pressed to your order
20+ years exporting to Europe, the Middle East, Africa and the Americas
Why buyers specify this build
Every veneer, the grade pair and the glue line — the three things a birch buyer checks first.
Every veneer is birch
Face, back and every core layer. No poplar centre — the edge shows one colour and one species, and there is nothing inside to delaminate from the face.
Void-free, 3D-machinable
Gaps and overlaps are pressed out, so the sheet takes CNC routing, laser cutting, edge rounding and finger joints without the blow-outs that stop a line.
B/B down to CP/CP
One grade pair per job: clear faces for furniture, toys and instruments, patched faces for carcasses and structural panels, utility grade for crates.
Phenolic WBP bond
Phenolic resin through the glue line, E1 as standard. E0 or CARB P2 when the destination market or the end customer asks for it.
1,525 × 1,525 and 8 × 5 ft
The two sheets the trade buys, plus 1,220 × 2,440 mm, 1,250 × 2,500 mm and cut-to-size. Thickness 3 – 25 mm, ply count matched to the thickness.
Stable from −40 to +50 °C
The panel keeps its shape and its glue line through a container crossing two climate zones — and through a workshop that is not heated.
Overview
Full birch plywood — sold across Europe as Baltic birch — is a panel where every veneer, face to back, is rotary-cut birch. There is no poplar or combi core hidden in the middle, which is why the edge reads the same colour all the way through, the panel routs and lasers without a blow-out, and a screw holds where it is put.
We press it on our own line in Pizhou from birch logs out of northern Russia and the Baltic, bonded with phenolic (WBP) resin and sanded on both faces. Thickness runs 3 – 25 mm. The sheet the trade actually buys is 1,525 × 1,525 mm (5 × 5 ft) — the size that cuts a cabinet side without waste — with 8 × 5 ft, 1,220 × 2,440 and 1,250 × 2,500 mm alongside it, and cut-to-size on request.
Grades run from B/B, clear and unpatched for clear finishing, through S/BB and BB/BB to CP/CP for structural and utility work. Send the application and the face that is seen; we quote the cheapest grade pair that still passes, not the most expensive one on the list.
Typical applications
- Kitchen and bathroom cabinets, drawer boxes and carcass parts that are cut, edged and drilled
- Furniture frames, chair seats, bed slats and bent components
- Children's toys, play equipment and school furniture — clear B/B faces on an E1 bond
- CNC routing, laser cutting and 3D shapes where a void in the core would show as a blow-out
- Shopfitting, exhibition stands and interior panelling with a sanded, paintable face
- Loudspeaker cabinets, musical instruments and marine fit-out that need a dense, uniform core
- Film faced, coloured film and grid-marked builds pressed on the same all-birch core for formwork
What “100% full birch” actually means
Full birch is a panel where every veneer — face, back and everything between — is rotary-cut birch. The trade name is Baltic birch; the difference from a “birch plywood” with a poplar centre is the edge, and the edge is what a buyer checks first.
| 18 mm sheet, 1,525 × 1,525 mm | 100% full birch | Poplar-core “birch faced” |
|---|---|---|
| Core veneers | Birch, every layer from face to back | Poplar or combi — birch veneer on the outside only |
| Edge after cutting | Same colour through the thickness, closed, no voids | Dark poplar stripes, gaps and overlaps at the edge |
| Density | 640 – 700 kg/m³ | 480 – 550 kg/m³ |
| Weight, 18 mm at 1,525 × 1,525 | ≈ 28 kg per sheet | ≈ 21 kg per sheet |
| Machining | Clean cut and rout, holds an edge, takes a screw without a blow-out | Softer core tears at the edge, pilot holes wander |
| Where it fails first | Nothing to delaminate — the plies are the same species | Glue line between the birch face and the poplar core |
Both panels can carry the same face veneer and the same grade stamp. The difference only shows when the sheet is cut, routed, screwed or left in a damp site hut — which is why we quote the core, not just the face.
Grades: what the letters on the invoice mean
The grade pair reads face first, back second — B/BB is a clear face with a patched back. Every photo below is a face we have actually pressed: the difference between the six is what you can see, not what the ticket says. The Chinese code is what the mills write on the bundle, so the same panel can be ordered under either system.

Clear face and back — pin knots only, no patches, no colour variation. The panel you buy when the face is the finished surface.
Furniture fronts, toys, clear finishing, musical instruments
Sound face with small tight knots and no patches; BB back with light patches. One good face, one working face.
Kitchen cabinets, drawer boxes, joinery that is seen from one side
Both faces patched with matching veneer plugs; some colour variation allowed. The grade most carcasses are cut from.
The workhorse grade — shopfitting, carcasses, shelving, packing
All sound knots permitted with some open defects, sanded on both faces. Structurally sound, visually busy.
Packing, jigs, site protection, panels that get painted
Patches and filled open defects on both faces, sanded flat. The cheapest pair that still takes a laminate.
Structural panels, jigs, mezzanine decks, utility work
Large sound knots and open defects permitted, filled and sanded. Sold as a utility panel, never as a face panel.
Crates, pallets, site protection — quoted on requestMixed pairs are normal: a B face on a BB back is how most cabinet work is bought. Tell us where the panel is seen and where it is not, and we quote the cheapest pair that still passes.
Datasheet
Everything below is the standard build. Anything outside it — a different sheet, a thicker panel, a special grade — is a conversation, not a catalogue item.
Panel
| Sheet size | 1,525 × 1,525 mm (5 × 5 ft) 2,440 × 1,220 / 2,500 × 1,250 mm 2,440 / 2,500 × 1,500 / 1,525 mm (8 × 5 ft) |
| Thickness | 3 – 25 mm |
| Ply build | 4 mm 3-ply · 6 mm 5-ply · 9 mm 7-ply 12 mm 9-ply · 15 mm 11-ply · 18 mm 13-ply · 21 mm 15-ply · 24 mm 17-ply |
| Surface | Sanded both sides (S2S); single side sanded (S1S) on request |
| Core | 100% rotary-cut birch, void-free |
| Glue | Phenolic WBP |
| Formaldehyde | E1 as standard; E0 or CARB P2 on request |
| Density | 640 – 700 kg/m³ |
| Moisture content | 5 – 14 % |
| Edge | Square cut; water-based acrylic edge seal on request |
| Service temperature | −40 to +50 °C |
| Standard | Pressed to the Russian general-purpose birch plywood standard, STO 002255177-001-2013 |
| Certification | FSC chain of custody available; CE marking on film faced builds |
Ordering and loading
| Minimum order | One 40HQ — mixed thicknesses in the same container are normal |
| Lead time | 20 – 25 days from deposit for a standard 40HQ |
| Terms | FOB Qingdao / Lianyungang, CIF or CFR to your port |
| Packing | Plywood crates, or loose sheets corner-protected and strapped |
| Loading | Loaded to the container tariff; loading plan and photos before the container leaves |
| Documents | Invoice, packing list, B/L, certificate of origin, FSC and test reports on request |
Ply counts above are our standard press programme for each thickness. A different build is pressed to order — send the requirement and we confirm what the press can hold and what it costs.
Bare, sanded, or film faced on the same core
One core, four finishes. Most customers start with the bare sanded panel and come back for a film faced build once the job moves outside.
- Film faced, same core. Brown, black or red phenolic film pressed on the all-birch panel — see the all-birch film faced panel we ship for concrete formwork, same void-free core.
- Coloured film. Yellow, red, green and blue film for hoarding, signage, play equipment and fit-out panels that have to stay one colour after cutting.
- Grid-marked film. A 25 / 50 / 100 mm setting-out grid printed under the film for slab formwork — the panel works as its own tape measure on site.
- Bare and sanded. The panel on this page — sanded both sides, ready for lacquer, laminate, veneer or a direct print.
What arrives on site
Thickness checked at the edge, faces inspected before crating, bundles strapped and labelled, and a loading plan sent with the documents.




Buyer questions on this panel
Ask something elseWhat is Baltic birch plywood?
Is the core really 100% birch?
Which grade pair should I order?
Which thicknesses and sheet sizes can you press?
What glue and formaldehyde class do you use?
Can the same core be supplied film faced?
What is the minimum order and the lead time?
Can you send a sample before I order?
How is the panel packed and loaded?
Send a grade pair, a thickness and a quantity — the price comes back the same day
Tell us the sheet (1,525 × 1,525 mm, 8 × 5 ft or cut-to-size), the thickness and the grade pair you need — B/BB for clear faces, BB/BB for general joinery, CP/CP for structural work. We answer with the FOB price, the ply build and the loading plan, usually inside one working day.
- WhatsApp / mobile+86-13305214888
- Emailinfo@sunnyplex.com
- Telephone+86-516-86218866
- WeChat+86 133 0521 4888



Get factory-direct plywood prices
Send the product, thickness, size and quantity — our export team replies with an FOB quotation, usually within one working day.