Two 3-ply formwork panels on white, one standing on edge showing the three spruce layersFactory direct
H12-H20 Beam / 3Ply Formwork Panels

3-Ply Formwork Panels (3-SO)

Three layers of centre-sawn spruce with a double-sided urea-melamine face — the panel that leaves a clean, light-textured concrete face and comes back for the next pour.

  • Build3-ply spruce
  • Panel size1,500 – 2,500 × 500 mm
  • Weight9.7 kg/m²
  • FaceUrea-melamine 130 g/m²
  • GlueÖNORM B 3023
  • GradeAA / BB / CC
Request a price WhatsApp us

Factory-direct FOB quotation, usually within one working day.

  • Made in our own factories in Pizhou, Jiangsu — no trading margin

  • Panel size, grade and edge sealing produced to your order

  • 20+ years exporting to Europe, the Middle East, Africa and the Americas

Why buyers specify this build

What the panel actually is, in the terms our customers ask about — construction, glue, grade and packing.

Ask for the datasheet

A resin face, not a film

Urea-melamine is pressed into the wood rather than glued on as a film, so there is no film edge to lift and no plastic to peel at the cut.

Centre-sawn spruce only

Heart-free, centre-cut timber in all three layers — the reason the panel does not cup or split at the ends.

Light texture on the concrete

The face transfers a fine wood grain to the concrete: visible, even, and easy to read as fair-faced work.

Sealed on all four edges

Dispersion varnish on the moulded edge — the first place a cheap panel fails is water getting in at the edge.

AA / BB / CC, equal or non-equal

Face grades and thickness tolerance quoted per order, so you pay for the face your concrete actually needs.

100 panels per pallet

Palletised, strapped and wrapped — the handling unit matches a standard site forklift.

Overview

3-SO is a three-layer spruce panel with a double-sided urea-melamine resin face at about 130 g/m². The resin closes the grain, the panel leaves a light wood texture on the concrete, and the edges are sealed with dispersion varnish so water cannot work between the plies.

It is built from centre-sawn timber only, with the outer plies glued crosswise to the core. That is what keeps a three-layer board flat: minimum manufacturing tolerance, a precise format, and far less cracking than a cheap panel where the cover plies run the wrong way.

The glue line is resistant to boiling water, alkali and weather and meets ÖNORM B 3023 — the same class of bond we use in the H20 beam web, which is cut from this board. Grades run AA / BB / CC, equal or non-equal thickness, 100 panels to the pallet.

How the panel is built

  • Face

    Urea-melamine resin, about 130 g/m², both sides — smooth, closed surface

  • Outer plies

    Spruce, glued crosswise to the core so the panel stays flat

  • Core

    Solid spruce, centre-sawn timber only — no heart, no sap pockets

  • Edges

    Continuous perimeter moulding, sealed against water take-up

Technical data

Build3-ply solid spruce, centre-sawn timber only, layers glued crosswise
FaceDouble-sided urea-melamine resin, approx. 130 g/m²
Concrete finishSmooth face, light wood texture transferred to the concrete
EdgesContinuous perimeter moulding, sealed with dispersion varnish
GlueBoiling, alkaline and weather resistant — meets ÖNORM B 3023
GradeAA / BB / CC, equal or non-equal thickness
Panel size1,500 × 500 / 2,000 × 500 / 2,500 × 500 mm (150/50, 200/50, 250/50)
Weight9.7 kg/m² — 7.3 / 9.7 / 12.1 kg per panel
Packing100 panels per pallet

Typical applications

  • Beam sides and soffits in slab formwork
  • Wall and column formwork where the concrete stays exposed
  • Edge strips and fillets between panel fields
  • Precast moulds and table forms
  • H20 beam webs — the same 27 mm three-layer board

Buyer questions on this panel

Ask something else
What does 3-SO mean?
It is our catalogue code for the 3-ply spruce sheet with a double-sided urea-melamine finish. The 3 stands for three layers; SO marks the resin-faced formwork grade.
Which thickness should I order?
The board is built to your formwork pressure and to match the H20 web at 27 mm. Tell us the panel size, the pour height and how many cycles you need and we confirm the build — equal or non-equal thickness is your choice.
How many pours will it take?
The resin face is made for a high number of deployments, which is why the panel is sold for applications with high demands on the concrete surface. We quote the cycle count for your build rather than a blanket number.
Can it be cut on site?
Yes — it cuts and drills like any spruce panel. Seal the fresh edge with the same dispersion varnish before the next pour, or water will find the plies.
What is the minimum order?
One pallet of 100 panels, or mixed into a container with beams and other boards. Send the panel size and we come back with the loading plan.

Where this panel goes to work

Real photos — our panels going up on customers' formwork, the deck before a pour, and the bundles craned into the hold at Lianyungang.

Applications

Get factory-direct plywood prices

Send the product, thickness, size and quantity — our export team replies with an FOB quotation, usually within one working day.